
Bulk Earthworks And Site Cut-to-Fill
Cutting, filling and re-shaping land to bring a site to the levels your build or subdivision design calls for.
View serviceSpecialist & Rural
General information on the ground remediation groundworks sometimes required following EQC or insurance land-damage claims, an area of capability we are developing.
Our EQC/Toka Tū Ake insurance-related remediation groundworks experience and capability is still being confirmed. This page describes a type of work we may offer in future once that capability is confirmed, so treat it as general, educational background rather than an active service offer. We do not currently hold or claim EQC or Toka Tū Ake panel membership or any approved-contractor status.
Your site. A clear next step.
Christchurch EQC And Insurance-Related Remediation Groundworks covers general information on the ground remediation groundworks sometimes required following EQC or insurance land-damage claims, an area of capability we are developing.
Tell us what you want to achieve, where your site is and when you would like to start. Include any plans, access constraints or measurements that will help us understand the work.
Recognise your project
Define the work
Land identified as damaged in an engineer's or insurer's scope of works is excavated and removed. The scope defines what comes out; we work to it rather than forming our own view of the damage.
Reinstatement filling and compaction is carried out to the engineering standards specified. Compaction standards on remediation work are usually explicit and often tested, so the method follows the specification.
Ground affected by settlement, subsidence or cracking is regraded. Regrading restores levels and surface drainage over the affected area once the underlying work is complete.
Groundworks are provided in support of wider foundation or structural remediation programmes. On most claims the earthworks is one part of a sequence run by others, and it is planned to fit that.
We coordinate alongside geotechnical engineers, loss adjusters and insurers on the agreed scope. Remediation work is documented and signed off by several parties, and changes go through them, not us.
Site work is carried out against documentation produced through the claims process. We do not assess claims or determine entitlement; our part begins once a scope has been agreed and issued.
Why work with us
The engineer's or insurer's scope of works defines what comes out and what goes back. We build to that document rather than forming our own view of the damage.
Remediation specifications are usually explicit about compaction and often tested. The method is chosen to meet the standard the documentation sets.
Claims work involves geotechnical engineers, loss adjusters and insurers. We keep in step with them, and changes to scope go through them rather than being decided on site.
On most claims the earthworks is one part of a foundation or structural remediation sequence run by others. Our work is planned to slot into that.
Site work is carried out against paperwork produced through the claims process, which is what allows the work to be signed off and the claim to progress.
We do not determine entitlement or advise on cover. Our involvement begins once a scope has been agreed and issued, and we are upfront about that boundary.

Working conditions
Equipment needs for this type of work vary significantly depending on the extent of land damage and the engineering specification involved, and would only be confirmed once we've reviewed the relevant documentation for a specific property. We have not yet finalised our equipment or process approach for EQC and insurance-related remediation groundworks specifically, and this remains an area of capability we are developing.
Ground remediation tied to an insurance or EQC claim can involve a wider range of disruption than standard earthworks, since scope is often set by an engineer or insurer rather than by property owner preference alone. Timeframes for this kind of work typically depend on claims processes outside a contractor's control, including approvals and documentation. As this is a capability area we are still developing, we are not yet in a position to give general guidance on likely disruption for these projects.
Get the detail right
Remediation groundworks connected to insurance or EQC claims usually need to follow a specific engineering scope and satisfy sign-off requirements as part of the claims process, which differs from general earthworks. This is a specialised area, and property owners should confirm directly with us whether we are able to assist with their specific situation before assuming this service is currently available. We do not currently hold, and do not claim, any EQC or Toka Tū Ake panel membership or approved-contractor status.
This is an area of capability we are developing rather than a confirmed, active service — please contact us directly to discuss your specific situation before assuming we can take on this type of work.
No, we do not hold and do not claim any EQC or Toka Tū Ake panel membership or approved-contractor status.
In general terms it can involve excavating and removing land identified as damaged in an engineer's or insurer's scope of works, then reinstating and regrading the area to a specified standard, though the detail varies by property and claim.
Please get in touch to discuss your documentation and situation directly — we'll let you know whether this is something we're able to assist with at this time.
The scope is typically set by an engineer, loss adjuster or insurer as part of the claims process, rather than by the groundworks contractor.
Yes, this page describes an area we are actively developing, and we intend to update it once our experience and capability in EQC and insurance-related remediation groundworks is confirmed.
The next part of your project

Cutting, filling and re-shaping land to bring a site to the levels your build or subdivision design calls for.
View service
Precise excavation for foundations, footings and slabs to your engineer's drawings, with levels and depths checked before pour.
View service
Excavation for stormwater systems across Christchurch — pipe runs, sumps and catchpits, attenuation tanks and connections out to a kerb channel or council main.
View service
Precision excavation and groundworks for retaining walls across Christchurch's hill suburbs, cutting and benching to your engineer's design before the wall goes in.
View serviceTell us about your project and we will come back with clear next steps — no pressure, no jargon.
YOUR SITE. THE NEXT CHAPTER.
Start with your suburb, a few site details and what you want to build.
Plan your project